| |
VELLEMAN
You can command this remote control unit from anywhere, with a simple touch tone telephone. (House/Office telephone or cellular phone/HP) Each telephone becomes then a remote control. You call the TELEPHONE REMOTE CONTROL (Cellular Remote Control), dial your personal code and the command of your choice. This easy way enables you to switch any equipment on/off, from any places.
|
|
| |
How it works: you call TELEPHONE REMOTE CONTROL (RTC), wait until the line is put "hook off" ( some thing or some one takes the phone), dial your 4 digits personal code and then the commands of your choice.
|
|
|
REMOTE TELEPHONE CONTROL SWITCH
Mematikan-menghidupkan perangkat
( melalui telepon rumah-kantor dengan Handphone )
|
|
Berguna untuk mengaktifkan/ mematikan peralatan listrik (lampu taman, depan, pompa air, AC ) atau alat elektronik-komputer (Hub, Modem, Router, Switch, Radio), lewat Jaringan TELEPON Rumah/Kantor melalui PONSEL atau Handphone, sehingga peralatan ini dikontrol lewat saluran telephone PSTN atau POTS.
Ada 3 unit (switch) peralatan yang bisa dikontrol secara terpisah. Kotak khusus dihubungkan ke line telepon secara paralel, kotak ini akan mengontrol secara JARAK JAUH ke masing-masing switch. |
TEST DRIVE
|
|
| |
Produk dengan Inovasi Baru, dapat dihubungkan untuk menghidupkan/mematikan CCTV, Camera, Hub-Switch, IP Camera, Modem, Computer, PC, Air-condition, Lampu Depan/Taman, Lampu Belakang, Radio, Pemancar, PABX-Key-telephone, Radar dsb
|
| |
|
|
Kontrol fungsi On/Off Video, Modem, IP Camera, Jarak Jauh
|
|
VELLEMAN Code
|
Personal code: This code is four digit's (number) long and you are able to choose the 2 last with the intern dipswitch. Those two last digits are programmable from 0 to 9 for normal telephones. For special telephones or dialers 0-9 * # ABC is also available. So if you have access to a simple phone don't program those two digits above 9. Look up in the program scheme, the way to set your code.
Hook off : Remote Telephone Control Switch (RTC) can take the phone himself after a also programmable time of rings. To prevent any conflict with other equipment on the same telephone line this function can be disabled. If you have an answering machine who takes the phone after a few rings there is no need for RTC to do it, and you can disable this function by removing the single and only jumper inside the RTC. In case RTC has to take (answer) the line, you can program how many times the phone will ring before he put the line "hook off". This can be set together with the last digit of your code. The amount off rings is simply the double of the last digit of the code. If you have an answering machine on the same telephone line that takes the phone after 4 rings, it is better to program RTC in such way that he will take the phone after 5 to 10 rings. This way give you the possibility to access RTC even when the answering machine is left off. ( in this case you don't have to remove the intern jumper.)
APLICATION :
A phone call activated AC power controller that is highly effective at reducing costly, on site service calls. With a single phone call to remote equipment, The Power Stone™ can be used to check current power status, detect past power outages, and reboot on command. Popular applications include rebooting ATM's, web kiosks, web cams, digital recorders, video equipment, BBS servers, voice mail systems, any type of modem, windows driven pc's, etc. |
 |
|